Anti slip Switchboard matting - global2009a - GSE ONLINE SDN BHD
| Now Only: | RM 250.00 |
Our Switchboard matting / high voltage insulation rubber was tested according to TNB technical specification :
A) BS EN 60243-1 , Electrical strength of insulating materials - Part 1 &
B) BS EN 61111 Clause 5.6.3.4 , Voltage Withstand Test
Product Characteristic :-
1) Material : NATURAL RUBBER ( NR ) BASE POLYMER
2) Brand Name : GS-SM , Withstood 30kV ( Class 2 ) , 5mm Nominal Thickness , BLACK Colour with TNBR QATS Test Certificate No. : TNBR/HVLT-2012-02/004 ( BS EN 60243-1:1998 ) & TNBR/HVLT-2012-04/004 ( BS EN 61111 : 2009 Clause 5.6.3.4 )
3) Brand Name : GS-SMG , Withstood 40kV ( Class 3 ) , 5mm Nominal Thickness , GREY Colour with TNBR QATS Test Certificate No. : TNBR/HVLT-2012-04/001 ( BS EN 61111 : 2009 Clause 5.6.3.4 )
4) Surface finishing : with anti slip diamond plate surface to provide safe working
5) Specific gravity : ± 1.50 g/cm³
6) Hardness : 60 ± 5 Shore A
7) Elongation : Min ± 250 %
8) Tensile Strength : Min ± 5 MPa
9) OUR available Dimension :
Material Type : Natural Rubber ( NR ) base polymer
BS EN 61111 : 2009 Class 2 ( Withstood 30kV ) , GS-SM
A) Model : GS-SM 1 , Switchboard Matting , ( Black colour ) ,
5mm Tk x 1,000mm (1 m ) Width x 1,000mm ( 1 m ) Length / pc ( ~ 7.5kgs / pc )
B) Model : GS-SM 2 , Switchboard Matting , ( Black colour ) ,
5mm Tk x 1,000mm (1 m ) Width x 3,000mm ( 3 m ) Length / roll ( ~ 22.5kgs / pc )
C) Model : GS-SM 3 , Switchboard Matting , ( Black colour ) ,
5mm Tk x 1,000mm (1 m ) Width x 5,000mm ( 5 m ) Length / roll ( ~ 37.5kgs / pc )
Material Type : Natural Rubber ( NR ) base polymer
BS EN 61111:2009 Class 3 ( Withstood 40kV ) , GS-SMG
A) Model : GS-SMG 1 , Switchboard Matting , ( Grey colour ) ,
5mm Tk x 1,000mm (1 m ) Width x 1,000mm ( 1 m ) Length / pc ( ~ 7.5kgs / pc )
B) Model : GS-SMG 2 , Switchboard Matting , ( Grey colour ) ,
5mm Tk x 1,000mm (1 m ) Width x 3,000mm ( 3 m ) Length / roll ( ~ 22.5kgs / pc )
C) Model : GS-SMG 3 , Switchboard Matting , ( Grey colour ) ,
5mm Tk x 1,000mm (1 m ) Width x 5,000mm ( 5 m ) Length / roll ( ~ 37.5kgs / pc )
with anti-slip design on top surface :
Diamond plate / leaf liner high voltage insulation rubber mat
10) Scope , Usage & Application :-
High Voltage Insulation Rubber Mats / Non Conductive Mats - Most commonly called Switchboard matting, these non-conductive mats insulate workers, protecting from deadly shocks generated by high voltage equipment.
High Voltage Insulation Rubber mats are NORMALLY used as floor covering around electrical panels such as Power Transformer Rooms , Sub-Station , High Voltage Panels , LT & HT Labs, Control Panels etc , act as a safety pre-cautious for workers from electrical shock whether they are involved directly in electricity generation, transmission, distribution or its use.
Eventually , the High Voltage Insulation Rubber Mats need to be tested ( with proven data from LOCAL or international accredited testing body ) before being place at electrical generator rooms .
Carelessness of handling electrical apparatus or Mis-use of high voltage insulation rubber sheets / mats could be harmful to workers . ie , 10 kV High Voltage Insulation Rubber Mats place at 11 kV electrical generator rooms .
Rightfully of choosing the correct High Voltage Insulation Rubber Mat / Sheet is extremely IMPORTANT , These mats not only save money, but they save lives because a human life is above everything .
http://www.gserubber.com/switchboard_matting_quotation.html
Contact sales : 016 2555632
| RM250: | 1 sqmtr |
| Surface Feature: | Anti slip Diamond plate |
| Thickness: | 5mm |